|
|
TL001 |
Wire Cutter, Model 0301A
- Drop-forged jaws for cutting 12.5 gauge fence wire
- 8” in length, comfortably shaped handles
|
|
|
TL002 |
High Tensile Wire Cutter, Model 02PA
- Drop-forged, integrated jaws and handles for cutting high tensile wire
- 8” in length, soft plastic sleeves on shaped handles
|
|
|
TL003 |
Fencing Plier, 5-in-1
- Drop-forged carbon steel or chrome-vanadium steel for higher hardness
- Pulls staples, twists wire, cuts wire and hammers
- Fine finishing of head, pockmarked sleeves
|
|
|
Staple Puller |
|
Nail Remover |
|
Hammer |
|
|
|
|
|
Wire Cutter |
|
Wire Gripper |
|
|
|
|
|
TL004 |
Crimping Tool, Model 1002F
- Allows a wide range of wire or cable to be spliced with one tool
- 18" in length, blade drop forged
- Attached with tool gauge, ring spanner
- 1-2 slot for 14.5 and 15.5 gauge wire
2-3 slot for 12.5 gauge wire
3-4 slot for 10 and 11 gauge wire; 14 and 15 gauge barbed wire
4-5 slot for 9 gauge wire; 12.5 and 13.5 gauge barbed wire
|
|
|
TL005 |
Crimping Tool, Model 1002J
- 12" in length, compact size with two slots
- Blade drop forged
- 2-3 slot for 14.5 and 15.5 gauge wire
3-4 slot for 10 and 11 gauge wire
|
|
|
TL006 |
Clip Plier
- Easy way to attach and join wire, mesh or netting
- Medium size for 16 mm clips, large size for 19 mm clips
|
|
|
|
|
|
TL007 |
Clip Plier, Heavy Duty
- Heavy duty wire attachment pliers
- For 22 mm clips
- Optional clip magazine
|
|
|
TL008 |
Strainer Handle
- To tighten wire with strainer cog teeth or square protrusion
- Hardened pin with self-locking nut
- Electroplating or powder coating finish
|
|
|
TL009 |
Tensioner Handle
- Specially designed for tightening wire on tensioner
- Square head insert suitable for most designs of tensioner
- Long arm for easy manual operation
- Electroplated finish
|
|
|
|
|
|
TL010 |
Wire Stretcher
- Heavy duty design with strong hooks securely holds wire in place
- Makes repairing or splicing barbed, high tensile or smooth wire an easy task
- Powder coating finish
|
|
|
TL011 |
Chain Strainer
- Use with smooth or coated wire
- Cast walking arms and grabs
- Electroplated finish for long life
|
|
|
TL012 |
Spinning Jenny
- Pivots on ground pin
- 4 adjustable arms to accommodate most coil sizes
- Electroplated finish for long life
|
|
|
|
|
|
TL013 |
Earth Anchor
- Rod size up to 20 mm, length from 48Ħħ to 60Ħħ, auger width 6 & 8
- Auger welded on both sides, and eye is centered and welded shut
- Hot-dipped galvanized finish
|
|
|
TL014 |
Post Driver
- Drives steel posts into the ground quickly and easily
- Made in steel with Powder coating finish
|
|
|
TL015 |
Post Lifter
- Great tool for removing studded T post or some of other posts, without bending or twisting
- Easy one-man operation pull the post straight out of the ground
|
|
|
|
|
|